There is no doubt that, Harley-Davidson motorcycles are synonymous with power, style, and adventure. Riding one of these iconic machines is a dream come true for many riders. However, like any other vehicle, Harleys require maintenance to keep them running smoothly.
One crucial aspect of motorcycle maintenance is checking the engine oil. But do you check Harley engine oil on the kickstand? This question has been debated among riders for years, and in this article, we’ll explore the different viewpoints and provide you with the information you need to make an informed decision.
Do You Check Harley Engine Oil On Kickstand?
When checking the oil level on a Harley engine, it is recommended to have the motorcycle in an upright position. This is because the oil level can be affected by the angle of the bike. Checking the oil level when the motorcycle is on the kickstand may not provide an accurate reading.
It is very important to follow the manufacturer’s instructions when checking the oil level on a Harley engine. Typically, this involves warming up the engine, turning it off, waiting a few minutes for the oil to settle, and then checking the level using the dipstick provided.
If the oil level is low, it is important to add the correct type of oil recommended by the manufacturer until the level is within the recommended range. Overfilling the oil can also cause problems, so it’s important to add oil slowly, checking the level frequently until it’s at the appropriate level.
Read: Twin Cam 88 Oil Capacity
How Do You Check the Oil Level of Harley on Kickstand?
While it is generally recommended to check the oil level of a Harley engine in an upright position, some models may have a specific procedure for checking the oil level on the kickstand. It is important to refer to your Harley owner’s manual for specific instructions on how to check the oil level on your particular model.
However, a general method for checking the oil level on a Harley while on the kickstand involves the following steps:
- You should start the engine and let it warm up for a few minutes to ensure that the oil is circulated throughout the engine properly.
- Now it is time to turn off the engine and let it cool down for a few minutes to allow the oil to settle.
- You can go ahead and locate the oil dipstick on your Harley engine and remove it. Wipe off any oil on the dipstick with a clean cloth or paper towel. Reinsert the dipstick all the way into the engine, making sure it is seated properly. Remove the dipstick and check the oil level. The oil level should be between the minimum and maximum marks on the dipstick.
- If it is a case where the oil level is below the minimum mark, add the recommended type of oil in small amounts and recheck the oil level until it is between the minimum and maximum marks.
It is important to note that checking the oil level on a Harley while on the kickstand may not provide an accurate reading due to the angle of the bike. It is always best to check the oil level while the bike is in an upright position to ensure an accurate reading.
How Do You Change the Engine Oil and Oil Filter of a Harley?
Changing the engine oil and oil filter of a Harley is an important maintenance task that should be performed regularly to ensure the proper functioning and longevity of the engine. Here are the general steps for changing the engine oil and oil filter of a Harley:
- Gather the necessary supplies: You will need a new oil filter, new oil, a drain pan, a funnel, a socket wrench, and a filter wrench.
- Warm up the engine: Start the engine and let it run for a few minutes to warm up the oil. This will help the oil flow more freely when you drain it.
- Position the bike: Park the bike on a level surface and put it on a center stand or lift it up using a motorcycle lift.
- Drain the oil: Locate the drain plug on the bottom of the engine and place the drain pan underneath it. Use a socket wrench to remove the drain plug and let the oil drain out completely. Once the oil has drained out, replace the drain plug.
- Remove the oil filter: Use a filter wrench to remove the old oil filter. Be sure to have the drain pan underneath it to catch any oil that may spill out.
- Install the new oil filter: Apply a thin layer of oil to the gasket of the new oil filter before installing it. Tighten the oil filter by hand until it is snug, then use the filter wrench to tighten it an additional 1/2 to 3/4 turn.
- Add new oil: Look up the recommended amount and type of oil for your particular Harley model in the owner’s manual. Use a funnel to add the new oil to the engine through the oil fill port. Check the oil level with the dipstick and add more oil if necessary until it reaches the recommended level.
- Start the engine: Start the engine and let it run for a few minutes. Check for any oil leaks and make sure the oil pressure light goes off.
- Dispose of the old oil: Dispose of the old oil and oil filter in an environmentally friendly manner at a local recycling center or auto parts store.
It is important to note that the steps for changing the engine oil and oil filter may vary depending on the model of your Harley. Be sure to consult the owner’s manual for specific instructions and recommended maintenance intervals.
It is said that checking the engine oil on a Harley Davidson motorcycle while it is on the kickstand is not the most accurate method. The recommended way to check the oil is with the bike in an upright position, preferably after a short ride to ensure proper oil circulation. This is because the kickstand position can affect the oil level and potentially give a false reading.
However, there are some experts who argue that checking the oil on the kickstand can still provide a rough estimate of the oil level, but it is not as reliable as the upright method. Ultimately, it is important to follow the manufacturer’s guidelines for checking the oil to ensure the best possible performance and longevity of your Harley Davidson motorcycle.