What Happens if You Put Too Much Oil in Your Car? Read!

Changing the engine oil in your car is probably one of the most common tasked you’ve done as it helps to keep your vehicle running as it should. Fresh oil is consider to be the life of a engine, but pouring too much of it can cause serious damage and if it’s something you’ve done, you may want to removed it as soon as possible.

What Happens if You Put Too Much Oil in Your Car?

When changing your car oil one thing that you should keep in mind is not overfilling it with oil. If somehow you have mistakenly done this, you should get it fixed immediately as this can cause significant damage to the engine components and even lead to your engine becoming seize up.

If you are certain that you have an oil overfill, you should first confirm that it is actually overfilled before attempting to get the issue fixed. In order to fix this issue you must take the time out to drain the oil.

How Overfilling Damages Your Engine

What Happens if You Put Too Much Oil in Your Car

The fact that your car needs oil in order to operate, you might think that filling it up to the point where it is overflowing is the way to go, but we don’t ever recommend doing that. Pouring too much oil in your engine is actually a bad thing and is not something you should practice. If somehow you have overfill your engine, it could then lead to a costly repair.

Whenever you overfill your engine with oil, it could lead to an excessive amount of oil flowing to your vehicle’s crankshaft and will allow the rotation speed of the crankshaft to aerate the oil. This actually result in the oil turning into foam and causes it to not move through your engine as it should and can even lead all oil flow to cease. At this point, your engine oil will become too hot and causes oil pressure loss. When the engine doesn’t get the oil it needs for lubrication, it can seize up.

Properly Check Your Oil

If it’s a case where you have done an oil changed on your vehicle and somehow you notice a white, thick smoke coming from your exhaust pipe when you are driving, it is a possibility that you’ve overfilled the oil. In order to confirm if overfilling the oil is the issue, you should drive the car for about 15 minutes since this will oil to start moving through the engine and ensures a more accurate reading on your dipstick.

Upon testing make sure that the car is parked on a flat surface and remove the dipstick from the engine, and wipe it using a paper towel, rag, etc. Put the dipstick back in and wait a few seconds before taking it out again. Now take a look at the dipstick fill line. If the oil is above the fill line, then it is a sure indication that you’ve overfilled your engine oil.

Drain Excess Oil From Your Engine

After you’ve taken the time out to acknowledge that you have too much oil in your vehicle, you may want to start draining some until you get it to the right level. If you have change the oil on your own, then you should be able to drain the oil with ease.

However, even if you are a newbie, it should be hard. All you need is a 3/8 inch drive socket wrench and slide under your vehicle. Once you’re under the vehicle, you should locate the pan , at the bottom of the pan there will be a large bolt; which is known to be the oil plug.

Upon locating it, you should put a plastic pan under the oil pan and use your socket wrench to loosen the oil plug. Now, let the oil drip until you think you have drained enough oil, then tighten it back up.

Now, it’s time to check the dipstick again. If it’s still too full, you should probably repeat the same process. However, if you think you have drained too much, then you can add more to make it up.